Plumbing problems can be a major hassle for any homeowner, not to mention costly if you have to call out a professional. Fortunately, you can address many common plumbing issues with basic DIY know-how and the right tools. Check out these five DIY plumbing fixes to get you started.
DIY Plumbing Fixes: Clearing a Clogged Drain
A clogged drain is one of the most common plumbing issues. If water isn’t flowing down your drain, you may have a clog caused by hair, soap scum, or other debris. To fix it, you’ll need a plunger and some elbow grease. First, ensure the tool is fully submerged in water, then push and pull the plunger in a vertical motion to create suction and pressure to clear the clog.
Repairing Leaky Faucets
Dripping faucets are a significant source of wasted water—not to mention the constant “drip, drip” driving you crazy. You’ll need basic tools like a wrench and adjustable pliers to fix a leaky faucet.
Start by turning off the water supply and opening the faucet handles to release any remaining pressure. Then, remove the faucet handle and locate the screw on the handle. Once you have access to the valve stem, replace any corroded or worn parts. Reassemble everything and turn on your water supply to test for success!
DIY Plumbing Fixes: Replacing a Toilet Flapper
A leaking toilet tank might be due to an old or worn-out flapper, the rubber stopper that prevents water from flowing from the tank to your bowl. You’ll need a replacement flapper and pliers (or an adjustable wrench) to replace it.
Start by shutting off the water supply and draining any remaining water from the tank. Then, unhook the chain connecting the handle and remove the old flapper. Install the new one and reattach the flush handle chain, ensuring it’s not too tight or loose. Turn your water supply back on and test to make sure there’s no more leaking!
Installing a New Showerhead
Replacing an old showerhead is surprisingly easy. You’ll need a pair of pliers and some pipe tape. Start by removing the old showerhead. Clean pipe threads with a wire brush and wrap them in pipe tape for extra security. Finally, attach your new showerhead and turn on the water to test it out.
Replacing a Toilet Fill Valve
If your toilet isn’t filling up correctly, you may need to replace the fill valve. You’ll need basic tools like an adjustable wrench, a screwdriver, and possibly some plumber’s putty or Teflon tape.
First, shut off the water supply to the toilet and drain any remaining water in the tank. Then, remove the old fill valve and replace it with a new one. Reattach all hoses and use the plumber’s putty or Teflon tape, if necessary, to form a watertight seal. Turn your water supply back on and test for success!
These simple DIY plumbing fixes should help you tackle some of your home’s most common plumbing issues. If your problem is more than you can handle, don’t hesitate to call a professional plumber to make repairs.
American Home Inspection Services provides inspection in Southeast Michigan. Contact us to schedule an appointment for our services.